AKH-0.66/III vertical row current sensor for busbar is used as an AC current signal acquisition component and can be used in conjunction with measuring instruments. The primary current measurement range is 5-6300A while the secondary output is 5A or 1A, and the measurement range is 5-120% of the rated value. The product adopts clamshell design, beautiful appearance and convenient wiring.
| Specification | Rated current ratio (A) | Precision degree and corresponding rated load (VA/ Ω) | Straight-through tums | Bus spec(mm)/ number | Installation | |
| 0.2 | 0.5 | |||||
| 60III | 200-300/5(1) | 2.5 | 1 | 60×10/1-3 | E | |
| 400/5(1) | 5 | 1 | ||||
| 500-800/5(1) | 10 | 1 | ||||
| 1200-1500/5(1) | 15 | 1 | ||||
| 2000/5(1) | 20 | 1 | ||||
| 2500/5(1) | 30 | 1 | ||||
| 80III | 300-400/5(1) | 5 | 1 | 80×10/1-3 | ||
| 500-800/5(1) | 10 | 1 | ||||
| 1000/5(1) | 10 | 1 | ||||
| 1200-1500/5(1) | 15 | 1 | ||||
| 2000/5(1) | 20 | 1 | ||||
| 2500-3000/5(1) | 30 | 1 | ||||
| 100III | 600-800/5(1) | 10 | 1 | 100×10/1-3 | ||
| 1000/5(1) | 10 | 1 | ||||
| 1200-1500/5(1) | 15 | 1 | ||||
| 2000/5(1) | 20 | 1 | ||||
| 2500-5000/5(1) | 30 | 1 | ||||
| 130III | 2000/5(1) | 20 | 1 | 130×10/1-3 125×10/1-3 | ||
| 2500-5000/5(1) | 30 | 1 | ||||
It adopts vertical square hole type, which can pass through 1-3 busbars;
It not only has the characteristics of type I and type II, but also can be used for measuring electric energy in the power supply system, and can be used for protection with the current relay;
The clamshell material is made of transparent polycarbonate, which can clearly see the wiring of the secondary lead.
English
日本語
한국어
français
Deutsch
Español
italiano
русский
português
العربية
tiếng việt
Türkçe
