Name: AID150 Alarm And Display Device
Brand: Jiangsu Acrel Micro-grid Research & Development Institute

Acrel AID150 Alarm And Display Device

AID150 centralized alarm and display instrument adopts LCD liquid crystal display and RS485 bus, which can centrally monitor the data of up to 16 sets of AIM-M10 medical intelligent insulation monitors, and can remotely sound and light alarm. AID150 can also monitor the data of multiple sets of AIM-R100 residual current monitors. It is installed embedded in the wall and is suitable for centralized monitoring in operating rooms, intensive care units or other medical places.

Specification of AID150 Alarm And Display Device

Parameters

Parameters/Model		AID10	AID120	AID150
Auxiliary power	Voltage	DC 24V
	Power consumption	< 0.6W
Insulation resistance measurement range		—	0—999kΩ	—
Insulation alarm value range			50—999kΩ
Transformer load rate display		—	Percentage display	—
Load current alarm settings		14A, 18A, 22A, 28A, 35A, 45A
Temperature alarm value range		0~+200℃
Alarm		Audible and visible alarm
Alarm Type		Insulation fault, overload, over-temperature, equipment failure
Communication		RS485 interface, MODBUS-RTU protocol
Display method		—	LED Display	128*32 LCD

Features of AID150 Alarm And Display Device

Through the bus communication technology, the monitoring data and alarm information of the insulation monitor can be read and displayed in real time;

The alarm parameters of the insulation monitor can be set remotely;

When the system fails, it can sound and light alarm. After pressing the mute button, the sound will be turned off, and the corresponding fault indicator light will not go out until the fault is resolved.

Diagram of AID150 Alarm And Display Device

Features

Features

Features

Display Sample

Wiring Instruction

Typical Connection