The AID120 alarm and display indicator can monitor one AIM-M100, and it is installed in-wall. It is suitable for monitoring in operating rooms or intensive care units that only use a single set of isolated power supply. It has sound and light alarms for insulation, overload, over-temperature, equipment failure and other failures. It can be displayed by digital tubes and has RS485 communication.
| Aux Power | Voltage | DC 24V |
| Power Consumption | ≤0.6W | |
| Insulation Measure Range | 10~999kΩ | |
| Insulation Alarm Range | 50~999kΩ | |
| Transformer Load Rate | Percentage display | |
| Current Alarm Range | 14A, 18A, 22A, 28A, 35A, 45A | |
| Temperature Alarm Range | 0~+200℃ | |
| Alarm Mode | Audible and visual alarm | |
| Alarm Type | Insulation fault, overload, over temperature, device failure | |
| Communication Mode | RS485（MODBUS-RTU） | |
| Display Mode | LED display | |
Through the bus communication technology, the monitoring data and alarm information of the insulation monitor can be read and displayed in real time;
The alarm parameters of the insulation monitor can be set remotely;
When the system fails, it can sound and light alarm. After pressing the mute button, the sound will be turned off, and the corresponding fault indicator light will not go out until the fault is resolved.
English
日本語
한국어
français
Deutsch
Español
italiano
русский
português
العربية
tiếng việt
Türkçe
